Yes there is an option for problem plagued front hubs on the Fords. You no longer have to replace the front hubs with the OEM units that are prone to failure. Dynatrac has addressed this issue with a Free-Spin Hub Conversion Kit for the 2005 to 2009 Ford F250, F350, F350 Dually, F450 and F550 trucks.
The Dynatrac FO60-3X1104-C Free Spin Hub Conversion for 2005-2009 Ford 4X4 trucks.
Dynatrac's Free Spin Hub Kit was designed specifically to remove a weak link in the popular Ford Super Duty 4x4 trucks. The week link in the 1999 to 2009 Ford Super Duty trucks is the unitized bearing. When the unit bearing fails, the vehicle is often immediately disabled and cannot be driven anywhere until the unit bearing has been completely replaced. That means towing, downtime, expensive dealer repairs and a ruined vacation or lost revenue for a work truck. Now there is a way to prevent such failures by installing a Dynatrac Dynatrac Free Spin Hub Kit on your 1999 - 2009 Ford Super Duty truck.
When factory specs don't cut it. No matter how you use your truck, the engineers at Dynatrac understand that the measure by which all parts are judged is strength and performance. From light duty to extreme use, your vehicle should be built for reliability and endurance under any conditions. And all too often, the original equipment falls short.
Recreational tow rig. Off-road explorer. Industrial workhorse. No matter how you use your truck, the engineers at Dynatrac understand that the measure by which all parts are judged is strength and performance. From light duty to extreme use, your vehicle should be built for reliability and endurance under any conditions. And all too often, the original equipment falls short. As an industry leader, Dynatrac has taken up the challenge of building the better truck.
Designed specifically to remove a weak link in the popular Ford Super Duty trucks. The Dynatrac Free-Spin Heavy Duty Hub Conversion Kits replace the factory unit bearings with fixed spindles for superior strength, and smooth performance.
The Dynatrac FO60-3X1104-C Free Spin Hub Conversion for 2005-2009 Ford F250, F350, F350 Dually, F450 and F550 4X4 trucks:
* Pro 60 spindles (fixed spindle design)
* Pro 60 8 on 170 mm wheel hubs
* Pro 60 35 spline 1.5” diameter outer axle shafts
* 35-spline Warn Premium manual locking hubs
* User serviceable inner and outer wheel bearing, races, and seals plus all hardware
* ABS tone rings and sensor mounts
This combination of parts has been designed and tested to provide the best longevity and reliability under the most severe use. While the factory unit bearing is non-serviceable and prone to failure, the Free-Spin hub conversion offers ease of maintenance, a much smoother ride, greater fuel economy, and longer axle life. Advantages that add up to tremendous cost savings over the life of your vehicle.
When a unit bearing fails, the vehicle is often immediately disabled and cannot be driven anywhere until the unit bearing has been completely replaced. That means towing, downtime, expensive dealer repairs and a ruined vacation or lost revenue for a work truck.
For recreational truck enthusiasts, the Free-Spin hub conversion eliminates a weak link that could easily leave you stranded. For commercial truck owners and fleet managers, who rely on their rigs 24/7 to get the job done, the Free-Spin hub conversion ensures that your trucks are on the road making you money.
The Dynatrac FO60-3X1104-C Free Spin Hub Conversion for 2005-2009 Ford F250, F350, F350 Dually, F450 and F550 4X4 trucks benefits are:
FUEL and MAINTENANCE Savings Start NOW!
You will feel a dramatic reduction in front end vibrations once you unlock the front axle.
Increases reliability by eliminating troublesome axle disconnect operation.
Lower cost of ownership – Wheel bearings and seals are dramatically cheaper to maintain, and can be easily serviced for longer life, even under severe conditions.
Dramatic increase in axle strength and reliability with 35-spline 1.50” shafts.
Simple bolt on installation - No machining or welding required
This Dyntrac Ford Free Spin Hub Conversion Kit is available in the KLM Store
http://www.klmstore.com/dynatrac-fo60-3x1104-c-05-08-ford-free-spin-heavy-duty-hub-conversion-kit.aspx
