- FREE GROUND SHIPPING -
Borgeson Steering Shaft 000970 is a replacement intermediate steering column shaft for the 1970 to 1979 Ford Bronco, F100, F150, F250 and F 350. This 970 Ford truck heavy duty telescopic steel steering shaft connects from factory column to steering box and it helps remove the play in the steering of your truck. READ MORE >>
BORGESON STEERING SHAFT 000970 Ford Truck Replacement Steering Shaft
This BORGESON 970 REPLACEMENT STEERING SHAFT will fit the following Ford vehicles:
- Ford Bronco
- Ford F-100
- 1970 to 1979 Ford F-150
- 1970 to 1979 Ford F-250
- 1970 to 1979 Ford F-350
The Borgeson 000970 Heavy Duty Steering Column shaft consists of :
- Two precision needle bearing u-joints
- A telescoping shaft.
- Will accommodate Ford trucks with up to a 4" body lift.
- Connects the factory Steering Column to the Steering Box
The BORGESON STEERING SHAFT 970 is a heavy duty telescopic steel steering shaft connects from the factory column to steering box. This Borgeson 970 replacement steering shaft is considered an Extreme duty shaft with two billet steel universal joints. This Ford replacement steering shaft does not contain a Vibration damper.!
Are you finding it difficult to keep your Ford truck from wandering on the road? A replacement Borgeson 970 Steering Shaft is the answer to removing the play in the steering. Tighter steering and better handling are felt as soon as a new Borgeson 970 Ford Replacement Steering Shaft is installed in about a 30 minutes or less.
Full-size Ford Pickups have a type of steering coupler that can show signs of wear in as little as 4500 miles, depending on how the truck is used. This wear, which causes play in the truck’s steering, is even more noticeable if your vehicle is used for plowing, towing or if oversized tires have been installed. Replacing the worn steering shaft with another OEM shaft only gives you a temporary fix. Borgeson has replacement steering shaft assemblies with precision needle bearing u-joints available for 1970 to 1979 Ford Bronco, Ford F150, Ford F250 and Ford F350 trucks. These Borgeson 000970 steering shafts are replacements for the under the hood intermediate shaft.
The Borgeson Universal Ford Truck replacement steering shafts help to correct the classic Ford "Steering Wander."
The 000970 replacement steering shaft for the 1970 to 1979 Ford Trucks is MADE IN THE USA!