- FREE GROUND SHIPPING -
This Cummins 4306993 Fuel Pressure Sensor is for the in rail sensor for the 2013 to 2017 Dodge Ram 2500, 3500, 4500 and 5500 series diesel trucks with the 6.7L Cummins engine. This genuine Cummins Fuel Rail Pressure Sensor is at on the back end of the common rail and communicates with the fuel control actuator through the Engine Control Module / ECM.
This Cummins, 4306993 fuel rail pressure sensor is used to sense the amount of fuel in the fuel rail by reading the internal pressure of the rail.
The common rail pressure sensor then sends an electronic message to the Power Control Module / PCM to precisely determine how much fuel needs to be released into the engine. The fuel rail pressure sensor in the Common Rail 6.7L diesel measures the pressure of the fuel supplied to the fuel injectors. This pressure signal is used by the PCM to adjust the fuel injector pulse width and duration while metering fuel to each cylinder during the combustion cycle.
This replacement fuel rail pressure sensor is a genuine Cummins part. The Cummins 6.7L fuel rail pressure sensor communicates with the fuel control actuator through the ECM. The fuel rail pressure sensor for the Cummins 6.7L diesel is located at the end of the fuel rail.
The Cummins 6.7L fuel rail pressure sensor is located on the back of the common rail. The fuel pressure sensor consists of a high-grade spring steel diaphragm with an attach strain gauge. The sensors internal diaphragm deflection changes the resistance of the strain gauge.
The Engine Control Module supplies the 5 volt supply voltage and ground for the fuel pressure sensor.
The Cummins 4306993 fuel rail pressure sensor uses a knife edge seal at its connection point to the fuel rail.
The Cummins 4306993 Fuel Rail Pressure Sensor is located at the end of the fuel rail and depicted as part number 10 in the exploded view illustration. This pressure sensor is an OEM Cummins part which is backed by the Cummins Warranty.