Product Application: 2008 to 2010 Ford Powerstroke - Highly Modified HP (1200-1500 HP) Manufacturer: FASS Item Number: FASS T F16 Titanium Series Fuel Pumps Manufacturer Part No: FASS T F16 Titanium Series Fuel Pumps
IN STOCK AND READY TO SHIP! Condition: NEW
- FREE GROUND SHIPPING -
The FASS T F16 Titanium Series For the 2008 to 2010 Ford Powerstroke 6.4L diesel fuel pumps.
The modern Powerstroke diesel installed in the Ford uses a high-pressure common rail fuel injection system. Diesel Fuel is supplied to the common tube, or rail by the fuel injection pump to keep fuel available to the injectors when needed. Your diesel fuel injectors work with extreme pressures and an electronically controlled injection system. The FASS Titanium Series Fuel Air Separation System provides advanced fuel filtration which removes diesel fuel contaminants such as:
FASS T F16 095G provides 95 Gallons per hour at 8 to 10 psi for the 2008 to 2010 Ford Powerstroke trucks with Stock To Moderate Horsepower
FASS T F16 150G provides 150 Gallons per hour at 8 to 10 psi for the 2008 to 2010 Ford Powerstroke trucks with Stock To Moderate Horsepower
FASS T F16 220G provides 220 Gallons per hour at 8 to 10 psi for the 2008 to 2010 Ford Powerstroke trucks with Moderate to Extreme Horsepower
FASS T F16 220G provides 260 Gallons per hour at 8 to 10 psi for the 2008 to 2010 Ford Powerstroke trucks with Super Extreme Horsepower
FASS Titanium Series Systems diesel fuel pumps support Stock to Super Extreme Powerstroke engines. The installation of High Performance aftermarket modifications such as Performance Chips, Injectors and other products that increase fuel demand in your Ford Powerstroke 6.4L are supported by a FASS lift pump.
FASS Bolt On Mounting Bracket, allowing the Titanium Series pump to be mounted within minutes, without any welding or drilling of your trucks frame.
FASS Silencing Technology to help reduce down the noise created by installing and using an aftermarket fuel separation unit. By using radius cuts, tight tolerances on all gears.
FASS Performance Radius Cuts are an advanced machining technique that improves the flow of fuel by creating smooth flowing cuts within the aluminum housing, to prevent turbulence in the flowing fuel and the reintroduction of air and vapor back into the fuel supply.
FASS Mass Fuel Flow Return technology is used to Polish the fuel continually by keeping a positive pressure on the fuel supplied and returned to the tank.
The FASS Titanium Series Fuel Air Separation Systems for the Ford Powerstroke 6.4L diesel engines are MADE IN THE USA!
Be the first to review this product