Home > Fleetguard FS1280 Fuel Water Separator Filter
Cummins Diesel Fuel Water Separator Filter For BTA and 6CTA Diesel Engines
The Fleetguard FS1280 is a fuel water separator filter benefits:
- Removes the entrained water only from your diesel fuel
- Removes the emulsified water only from your diesel fuel
- Filters to a 20 Micron Level on the First Pass.
- Filters to a 10 Micron Level on the Second Pass.
- Contains an integrated drain valve assembly.
Fleetguard FS1280 Specifications:
- Outside Diameter 93.73 mm or 3.69 inches.
- Overall Height 164.85 mm (6.49 inches
- Thread Size 13/16-18 UNS-2B
FS1280 Water Separator Filter applications:
- Cummins 4BTA3.9C
- Cummins 4BT3.9C
- Cummins 4B3.9 0
- Cummins 4BTA3.9-G2
- Cummins 6BTA5.9
- Cummins 6BT5.9
- Cummins 6CTA8.3
- Cummins 8.3L
Fleetguard FS1280 Fuel Water Separator Cross References:
- Agco 72501531
- CUMMINS 3890706
- CUMMINS 3903410
- CUMMINS 3930942
- DRESSTA 161623
- VOLVO 36846
- PUROLATOR P551329
NOTE: The FS1280 water separator filter is not recommended for Marine Application!
The water separator filter is a spin engine spin on type filter that removes both free and coarse water down to a 10 Micron level. The Fleetguard FS1280 Water Separator Filter meets today's high-pressure fuel systems requirements for entrained and emulsified water separation that causes injector tips to wear out prematurely. Installation is simple and will be leak free because replacement seals are included with this Filter. This Water Separator is a direct OEM Cummins replacement filter.
KLM recommends regularly draining of this fleetguard fuel water separator filter to remove the water contained within this filter. Periodically removing the water from this Fleetguard water separator filter will help to prevent freeze ups in your vehicle fuel system during the winter months. KLM Performance recommends keeping a spare set of the Fleetguard Replacement Filters in your vehicle at all times.