Home > Fleetguard FS20089 2013+ Dodge Cummins 6.7L Fuel Water Separator Filter
Fleetguard FS20089 - Cummins Filtration Dodge Ram 6.7L Cummins Diesel Fuel Water Separator Filter
This Cummins Filtration FS20089 Fuel/Water Separator Filter is the replacement frame mounted water separator filter that is used on 2013 to current model Dodge Ram trucks with the Cummins 6.7L diesel engine.
Fleetguard FS20089 Dodge Ram Cummins 6.7 Diesel Engine Fuel Water Separator Filter applications:
- 2013 Dodge Ram 2500, 3500, 4500 and 5500 2WD and 4WD
- 2014 Dodge Ram 2500, 3500, 4500 and 5500 2WD and 4WD
- 2015 Dodge Ram 2500, 3500, 4500 and 5500 2WD and 4WD
- 2016 Dodge Ram 2500, 3500, 4500 and 5500 2WD and 4WD
- 2017 Dodge Ram 2500, 3500, 4500 and 5500 2WD and 4WD
- 2018 Dodge Ram 2500, 3500, 4500 and 5500 2WD and 4WD
The Dodge Ram Cummins diesel models produced after the 2013 model year use two different diesel fuel filters.
- A frame rail mounted diesel fuel water separator filter located in the rear of the truck.
- An engine mounted diesel fuel filter located in the front of the truck.
Fleetguard FS20089 Fuel/Water Separator Specifications:
- Overall Height 139.8 mm or 5.504."
- Largest OD 107.9 mm or 4.248."
- Gasket OD 91.12 mm or 3.587"
- Thread Diameter 1.0 in
- Thread Pitch 14.0 Threads Per Inch
- Thread Class 2B
- Thread Form Unified National
- Emulsified Water Separation 99.9%
- Free Water Separation 99.9%
- Micron Rating 95% efficiency @ 2 microns.
This FS20089 Cummins 6.7L Fuel Water Separator Filter attributes:
- This diesel fuel filter Is the primary diesel fuel filter on 2013 to current model Dodge Ram trucks.
- The filter is designed specifically for use in the two-stage fuel filtration system in the Cummins 6.7L powered Dodge Ram trucks!
- This Filter removes 99.9 percent of the Emulsified Water from your diesel fuel.
- This Filter removes 99.9 percent of the Free Water from your diesel fuel.
This FS20089 Fuel/Water Separator Filter Installation:
- For the installation of this new Mopar 6.7L Diesel Fuel Filter, you will need to install the new filter O-ring for a leak-free installation.
- A new O-Ring is included with this filter for the sensor installation.
- This diesel fuel water separator filter element is located on the frame rail in the rear of the truck.
This FS20089 Fuel/Water Separator Filter Cross References:
- Mopar 68197867AA
- Racor PFF54529
- Wix WF10112
- Napa 600112
- Baldwin BF46031
This OEM Cummins 6.7L Fuel Filter is the diesel water separator filter installed on 2013 to current model Dodge Ram trucks. This filter is manufactured by Fleetguard a division of Cummins to meet the exact diesel fuel filtration specifications required for a long trouble free life of your fuel injection system. This diesel fuel filter is offered as a lower cost alternative fuel filter. The FS20089 filter adheres to the strict fuel filtration standards established by Cummins for a trouble free fuel injection system.
List Price: $67.85add to cart
List Price: $55.21add to cart