Mopar 68282012AA MAP Sensor 07.5-19 Dodge Ram 6.7L

This Mopar 68282012AA MAP Sensor for the 2007.5 to 2019 versions of the Dodge Ram trucks with the 6.7L Cummins diesel engines. The Cummins 6.7L diesel uses this sensor to measure the Absolute Pressure of the incoming air. This Sensor is one of the two different engine sensors located on the 6.7lL Cummins inlet air system. Please make sure this is the correct sensor you need before ordering. Engine Sensors are an electrical component, and they are a NonReturnable item.

In stock
SKU
Mopar 68282012AA
$89.98

cummins Intake Barometric Sensor, MAP Sensor, Manifold Absolute Pressure, Air Intake Pressure Sensor

Dodge Cummins Sensor  - Manifold Absolute Pressure Sensor - MAP Sensor -  Air Intake Pressure Sensor

The MAP Sensor for the Cummins 6.7L diesel engines is also known as:

  • Dodge Cummins MAP Sensor
  • Manifold Absolute Pressure Sensor
  • MAP Sensor
  • TMap Sensor
  • Air Intake Pressure Sensor
  • Barometric Pressure Sensor

Your Cummins Turbo diesel engine uses a manifold absolute pressure (MAP) sensor to determine changes in the intake air stream. These pressure changes are used to indicate engine load, boost, operational elevation, and other pressure variables that enable your ECU to make necessary changes so your diesel can run at peak performance. If your Dodge Ram 6.7L Cummins Turbo Diesel truck is experiencing decreased engine performance, it could be the MAP sensor

The Mopar Manifold Absolute Pressure Sensor Applications:

  • All 2007.5 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Turbo Diesels
  • All 2008 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Turbo Diesels
  • All 2009 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Turbo Diesels
  • All 2010 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Turbo Diesels
  • All 2011 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Turbo Diesels
  • All 2012 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Turbo Diesels
  • All 2013 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Turbo Diesels
  • All 2014 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Turbo Diesels
  • All 2015 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Turbo Diesels
  • All 2016 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Turbo Diesels
  • All 2017 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Turbo Diesels
  • All Cummins Common Rail 6.7L 24 Valve ISBE Diesels

Mopar 68282012AA MAP Sensor Cross References:

  • Mopar 53034091AB
  • Mopar 68282012AA
  •  68002434AA
  • Cummins 4921322
  • Cummins 4903286
  • 5wk96801

NOTE: Before you replace the MAP sensor, check the all of the connections and grounds first to see that are good and clean. This OEM Mopar Engine Sensors are an electrical component, and they are a NonReturnable item. The 6.7L Cummins diesel engine also uses an IAT Intake Air Temperature Sensor for proper engine operation. Please make sure you are ordering the correct sensor for the trouble code you are trying to fix. 

Product Application
2007.5 to 2019 Dodge Ram 2500, 3500, 4500 and 5500 6.7L Cummins Diesels
Free Ground Shipping
Free Shipping
Width
9
Height
6
Length
1
Manufacturer
Cummins
Item Number
Mopar 68282012AA
Manufacturer Part No
Mopar 68282012AA
Condition
New
ShippingMessage
IN STOCK
Model
2500, 3500, 4500, 5500
Year
2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Write Your Own Review
You're reviewing:Mopar 68282012AA MAP Sensor 07.5-19 Dodge Ram 6.7L