Engine Oil Pan Gaskets
What does the oil pan gasket do?
The engine oil pan or engine sump is where the engines oil sits and waits until it is pumped around the engine. The oil pan gasket is the sealing device used to connect the oil pan to the engine block. The oil pan gaskets are designed to provide a leak-proof seal between these two engine parts. The oil pan gasket must engine high loads exerted by extreme temperatures and pressure loads for a long period of time. the gasket is what is between it and the bottom of the engine to prevent oil leaking out. OEM oil pan gaskets are considered a wear item and will need to be replaced at some point in time. The replacement of the oil pan gasket is dependent upon the engines use, operating conditions, service intervals, and lubricants.
KLM Performance offers both aftermarket and OEM gaskets to address the issue of a leaking oil pan.
These aftermarket oil pan gaskets are designed to provide a leak-proof seal between your oil pan and engine block. The installation of these high performance aftermarket oil pan gaskets will end your leaking oil problems once and for all. Some engines have an upper and lower oil pan gasket. Motors with the upper oil pan may also be referred to as the crankcase. The oil pan is on the bottom of the engine, so any oil leaks from the top or front of the engine could drain down and look like an oil pan leak. Before you think about replacing your engine's oil pan gasket it is wise to verify that there is are no other oil leak present on your motor.
The tested and proven oil pan gaskets from Moroso are manufactured with a flexible high-temperature silicone that is molded around a rigid steel frame. The Moroso Oil Pan Gaskets were developed and test to solve an all too common problem of oil leaks.
When subjected to high pressure and temperatures these oil pan gaskets will not:
KLM Performance carries this premium OEM and aftermarket oil pan gaskets to solve the problem of leaking oil. If you do not see the diesel fuel filter you are looking for, please do not hesitate to call us or contact us.